Справка Houdini на русском Nodes Dynamics nodes

Gas DSD Configure Object dynamics node

Attaches the appropriate data for Smoke Objects to become a flame front based fire.

On this page

Parameters
- Initial Data
- Guides
Inputs
Outputs
Locals

The Gas DSD Configure Object DOP takes a smoke object and attaches the data which is needed for it to be used as a flamefront based fire..

Parameters

Two Dimensional

One of the divisions of the voxel grid will be forced to one to create a two dimensional field.

Plane

If set to two dimensional, this plane determines which axes remain unaffected.

Division Method

If non square, the specified size is divided into the given number of divisions of voxels. The sides of these voxels may not be equal, however, possibly leading to distorted simulations.

When an axis is specified, that axis is considered authoritative for determining the number of divisions. The chosen axis' size will be divided by the uniform divisions to yield the voxel size. The divisions for the other axes will then be adjusted to the closest integer multiple that fits in the required size.

Finally, the size along non-chosen axes will be changed to represent uniform voxel sizes. If the Max Axis option is chosen, the maximum sized axis is used.

When By Size is specified, the Division Size will be used to compute the number of voxels that fit in the given sized box.

Uniform Divisions

The resolution of the key axis on the voxel grid. This allows one to control the overall resolution with one parameter and still preserve uniform voxels. The Uniform Voxels option specifies which axis should be used as the reference - it is usually safest to use the maximum axis.

Divisions

The resolution of the voxel grid that will be used to calculate the smoke object. Higher resolutions allow for finer detail in both the appearance and in the resulting motion. However, doubling the divisions requires eight times the memory.

Since the substepping should be proportional to the voxel size, doubling the divisions may require double the substepping, resulting in sixteen times the simulation time.

Division Size

The explicit size of the voxels. The number of voxels will be computed by fitting an integer number of voxels of this size into the given bounds.

Size

The size of the voxel grid. The size of each voxel will be this divided by the divisions.

Center

The position in world space of the center of the voxel grid.

Initial Data

Flame Front

This is a path to the SOP that will be used to initialize the flamefront subdata.

It should be a volume object, such as that generated by the Iso Offset SOP with the Output Type set to SDF Volume.

Detonation Speed

The initial flame speed of the flamefront. This is how fast the flamefront moves in units per second.

Border Type

The behavior when the field is sampled outside of its defined box.

Constant

The initial value will be returned.

Repeat

The field will wrap, returning values from the opposite side of the field.

Streak

The value at the edge of the field closest to the sample will be returned.

Add Rest Field

Adds an extra field called "rest" which can be used to store rest positions for shaders.

Scale Rest Res

Scales the resolution of the rest field. Using a lower resolution rest field both reduces memory requirements of the rest field and also stiffens the rest field.

Guides

Each of the fields that define the smoke simulation can be visualized in a number of ways. The help for the Scalar Field Visualization or Vector Field Visualization provides more details about how these work.

Inputs

First

The smoke objects to turn into flame front fires by attaching the appropriate data.

Outputs

First

The Smoke object with flamefront data created by this node is sent through the single output.

Locals

This value is the simulation time for which the node is being evaluated.

This value may not be equal to the current Houdini time represented by the variable T, depending on the settings of the DOP Network Offset Time and Time Scale parameters.

This value is guaranteed to have a value of zero at the start of a simulation, so when testing for the first timestep of a simulation, it is best to use a test like $ST == 0 rather than $T == 0 or $FF == 1.

This value is the simulation frame (or more accurately, the simulation time step number) for which the node is being evaluated.

This value may not be equal to the current Houdini frame number represented by the variable F, depending on the settings of the DOP Network parameters. Instead, this value is equal to the simulation time (ST) divided by the simulation timestep size (TIMESTEP).

TIMESTEP

This value is the size of a simulation timestep. This value is useful to scale values that are expressed in units per second, but are applied on each timestep.

SFPS

This value is the inverse of the TIMESTEP value. It is the number of timesteps per second of simulation time.

SNOBJ

This is the number of objects in the simulation. For nodes that create objects such as the Empty Object node, this value will increase for each object that is evaluated.

A good way to guarantee unique object names is to use an expression like object_$SNOBJ.

NOBJ

This value is the number of objects that will be evaluated by the current node during this timestep. This value will often be different from SNOBJ, as many nodes do not process all the objects in a simulation.

This value may return 0 if the node does not process each object sequentially (such as the Group DOP).

OBJ

This value is the index of the specific object being processed by the node. This value will always run from zero to NOBJ-1 in a given timestep. This value does not identify the current object within the simulation like OBJID or OBJNAME, just the object’s position in the current order of processing.

This value is useful for generating a random number for each object, or simply splitting the objects into two or more groups to be processed in different ways. This value will be -1 if the node does not process objects sequentially (such as the Group DOP).

OBJID

This is the unique object identifier for the object being processed. Every object is assigned an integer value that is unique among all objects in the simulation for all time. Even if an object is deleted, its identifier is never reused.

The object identifier can always be used to uniquely identify a given object. This makes this variable very useful in situations where each object needs to be treated differently. It can be used to produce a unique random number for each object, for example.

This value is also the best way to look up information on an object using the dopfield expression function. This value will be -1 if the node does not process objects sequentially (such as the Group DOP).

ALLOBJIDS

This string contains a space separated list of the unique object identifiers for every object being processed by the current node.

ALLOBJNAMES

This string contains a space separated list of the names of every object being processed by the current node.

OBJCT

This value is the simulation time (see variable ST) at which the current object was created.

Therefore, to check if an object was created on the current timestep, the expression $ST == $OBJCT should always be used. This value will be zero if the node does not process objects sequentially (such as the Group DOP).

OBJCF

This value is the simulation frame (see variable SF) at which the current object was created.

This value is equivalent to using the dopsttoframe expression on the OBJCT variable. This value will be zero if the node does not process objects sequentially (such as the Group DOP).

OBJNAME

This is a string value containing the name of the object being processed.

Object names are not guaranteed to be unique within a simulation. However, if you name your objects carefully so that they are unique, the object name can be a much easier way to identify an object than the unique object identifier, OBJID.

The object name can also be used to treat a number of similar objects (with the same name) as a virtual group. If there are 20 objects named "myobject", specifying strcmp($OBJNAME, "myobject") == 0 in the activation field of a DOP will cause that DOP to operate only on those 20 objects. This value will be the empty string if the node does not process objects sequentially (such as the Group DOP).

DOPNET

This is a string value containing the full path of the current DOP Network. This value is most useful in DOP subnet digital assets where you want to know the path to the DOP Network that contains the node.

Note

Most dynamics nodes have local variables with the same names as the node’s parameters. For example, in a Position node, you could write the expression:

$tx + 0.1

…to make the object move 0.1 units along the X axis at each timestep.